Відео

What was your highway gas mileage?

Man I just got one of these. 05 limited. Slowly putting her together. You’re the only one posting videos. I’m looking to upgrade my radio so I appreciate the upload.

Thank you.

Hey Quad Boss, do you have a link to the mirrors? Or is this actual oem set from the 2014-18?

Good lord boy you ft wide tips on that thing.

Did you have to install a resistor? I'm working on the same car and have to replace the assembly as well as I want to upgrade to LED but read that I'd need resistors.

Did this car have a subwoofer? Crutchfeild is saying I need the RCA connector for my subwoofer but I can't find that square connector anywhere

Hey bro nice viedo. I have a question. How many man hours would you say it took you to replace this ps pump and what was your parts cost. The reason I ask iscI have a handicap brother in Houston that a mechanic is wanting $1500 to do this exact same job. His ps pump locked up, so I assume a new pump and accessories. This price just seems extremely high. Thank you

Is there a full video of you doing this?

I got mine out about 4 years ago but never put a new one in. It was hard and crap to get out. I'm not sure how to set it back to the face blow setting though. But I need to get this done before winter.

Did you take out the pump with the pulley, then take the pulley off after.. thank you

Should the fans blow up or blow down?

It looks like you put the motor wires on wrong?? Vegas Paul here.

No yeah, what spur gear and pinon gear

I have this same lock, it is only good for the casual thief who pulls on your handle and walks away. After installing mine and before putting the bezel on I realized that it takes five seconds to pop the bezel off and another few seconds to either bend the locking plate with Channel locks or remove the rods with your fingers and unlock the tailgate. This is a major problem with the way the tailgates are manufactured. At the very least I would also add a hose clamp with a security screw to the left tailgate hinge, that will at least prevent the tailgate from being stolen even if the crook gets what's in the bed - if anything is there. Of course you won't be able to remove your tailgate but some of the new ones cost upwards of $2,000. There is a video on UA-cam where a high school kid in the hood was busted for stealing a tailgate but they let him off easy - (I'm sure you can guess why). A few months later they caught him again and when they went to his house his backyard had a huge collection of tailgates that he was selling on Facebook. Funny how his parent didn't think of asking him why the backyard was filled with tailgates.

I would really like to see this thing put running with this power setup and the bigger tires. This is basically where I am wanting to get to. Trying to get it to where it will pull wheelies when given full throttle.

So this is the Arrma Senton V3 mega 550 that’s been modified to run 6s. I see you still have the factory slipper clutch and and power box. Have you had any issues with the over sized tires and this much power being run through the drive line?

Thanks for these vids man. Just picked up a 2006 freestyle with 80k miles.

Is there a special coolant burping procedure for these?

The how do you take out the bulbs under the dash board that light up the floor mats I’m pulling on it and I feel like I’m going to break it , is there a certain way to pull?

Thank you for posting this because i was losing sanity trying to figure out why the new regulators sit out too far to get the clip on. 2:14 The clip will go on without the flanged spacer, but this doesnt seal and huge leak. It would seal with the flanged spacer pushing o ring into raill, but any pressure will blow it off because the clip wont latch. The aftermarket regulators all claim to be compatible but not on this 01 2500 6.0 suburban im working on. Ordering a fuel pump for the dual tanks on this was also ridiculous. a suburban that requires buying parts by vin lol

You’re friggin amazing! Love your videos but love you most!

Thanks for posting these Freestyle videos! Great to know how easy that is to pop out. I think I'm going to add some USB charging ports there. Headliner replacement is going to be my next project. Appreciate it!

Goof off will eat the clear coat

I just removed mine this morning. Couldnt figure out why it wouldnt close to the front blower fully. Dismantled the mode actuator to find a busted gear. Thanks for the lesson on your video i was able to gently remove it and protect the rest of the system for a new actuator when it arrives.

Thanks for this, 3 years from then 🤙🏾

Getting ready to do this on a '15 Cad ATS -- dealer wants to pull the dash for $2k!!! I may have to cut something out with a dremmel and epoxy it back in. BTW, I saw you can connect a 9v battery to it to move it to match your old position....or open and swap the bad gear...or whatever.

You teach me so much!! You’re amazing!!!

What a Total waste of time. What did you show as far as actually fixing this. Damn, what a useless video. Go do something else because you sure aren't a video guy.

Did not work on my 99 GMC. I pressed it 4 times, heard no ding, and only turned the interior light on and off.

So, heat gun and alcohol. Got it.

I have a 99 S-10, 4 speed manual. The dome override button will not work. I just press down on the emergency brake, very slightly until the daytime running lights will turn off.

Didn't show yourself takung part off or putting part back on. Not sure how anyone could find this useful

Hmmm. This video is as good as just typing "remove old pump, replace with new one". You did not show any of the process or how you overcame any difficulty. Even how the pulley was removed and replaced was not shown. Not helpful honestly

Amazing walk through! Thank you so much! Helping me with replacing mine today

Doing the same job but in a Denali with the stupid center console in the way

Well it's actually an aceidelco part. It's not the original. It's just an aftermarket one inside an .Delco box.. you can get the original one with that writing on it and everything it cost more

Considering the new trucks ACS break in less than 5 years because they used a China condenser.... Thses lasted a long time... I would take all their little cheap easy problems over a modern car or truck with a huge monthly payment. Expensive insurance, repairs and exise tax... Plus it diffreciates, immediately. It's just not worth it. I don't think it is.... I had a 2016 Silverado and it was the biggest piece of s*** that was the only time I've ever been breasted stranded on the side of the road with a Chevy truck. All my old Chevys never left me stranded... Mind you would only had 72,000 mi on it too and the transmission went and the AC stopped working. It needed both upper control arms because there's no grease fittings anywhere so you have to just replace them when they wear out... In 75,000 mi. That's pretty disgusting dude. I've had old Chevys with 250,000, mi on the original ball joint

Great looking. Makes me think Rock Crawler. Giving me ideas, mua haha!

I dont get mad ot lasted 22 years

Even when I put the fans on the motor the screw to screw the motor back isn’t able to go in, can someone help me?

I have an 2006 and after 3 bolts and a plug It physically wont come out of that corner.

Looks like a ricer....

What spur gear are you using for that motor? Because I don't think the stock one fixes it.

Nice Job!

What happens if you don't have a fob to do that

Today we're going to take a minute and 30 second video and make it 6 minutes long I really don't know what I'm doing once I get the trim off I just saw somebody remove it with the heat gun one time when I was a kid So now I don't know what to do. Do they make a rubber wheels that buff it right off I don't know there's WD-40 take it off I don't know did they make something called Goo gone or goof off I don't know is there a nice degreaser that might take this off I don't know I'm a moron. Best part of the videos when he says something like today we're taking molding off a truck in this video and in this video we're taking molding off a truck.

We're going to go ahead and...😂

You don't have to waste time showing WHY you're taking the trim off, we click on your video to know HOW to remove it. We don't care why you are removing it!

Thanks man! We jsut got one, noticed the steering is a little tough not too much, but it maybe something I need to look into in the future.